← Back to results
Vulnerability record · public intelligence
CVE-2019-7636
UNKNOWN

CVE-2019-7636

Published Feb 8, 2019 · Updated Nov 3, 2026

Severity · CVSSUNKNOWN · Not scored
Known exploitationNot listed
EPSS / likelihood2.87%
QFinch risk scoreNot available

Original summary

Normalized public record · Updated Nov 3, 2026

SDL (Simple DirectMedia Layer) through 1.2.15 and 2.x through 2.0.9 has a heap-based buffer over-read in SDL_GetRGB in video/SDL_pixels.c.

Publisher and source text is retained separately from QFinch interpretation.

QFinch assessment

SDL (Simple DirectMedia Layer) through 1.2.15 and 2.x through 2.0.9 has a heap-based buffer over-read in SDL_GetRGB in video/SDL_pixels.c.

Evidence: public source records

Affected products

Affected scope reported by the available public evidence
Affected package, product or rangeFix status
Consult the referenced vendor advisory for affected versions.Consult source advisory

Matching a version is only one part of assessing exposure. QFinch has not assessed your environment on this public page.

Remediation

Apply the vendor-supported fixed release or mitigation, then verify the affected component is no longer reachable.

  1. Confirm the affected product and reachable code path exist in your environment.
  2. Apply the vendor-supported patch or mitigation from the primary advisory.
  3. Rescan the exact deployed revision and retain verification evidence.
Review primary references

Evidence coverage

FIRST-EPSSCVE-LIST-V5
SSVC priority
MEDIUM
Confidence
Not available
Aliases
None reported

Scores appear only when corresponding evidence exists. Missing data is never interpreted as zero risk.

Sources and record history

  1. [debian-lts-announce] 20190313 [SECURITY] [DLA 1714-1] libsdl2 security update ↗
  2. [debian-lts-announce] 20190313 [SECURITY] [DLA 1713-1] libsdl1.2 security update ↗
  3. bugzilla.libsdl.org ↗
  4. discourse.libsdl.org ↗
  5. openSUSE-SU-2019:1213 ↗
  6. openSUSE-SU-2019:1223 ↗
  7. openSUSE-SU-2019:1261 ↗
  8. GLSA-201909-07 ↗
  9. USN-4143-1 ↗
  10. USN-4156-1 ↗
  11. USN-4156-2 ↗
  12. [debian-lts-announce] 20191017 [SECURITY] [DLA 1714-2] libsdl2 regression update ↗

Record history

Published Feb 8, 2019 · Last refreshed Nov 3, 2026

Related intelligence
Browse all vulnerabilities →
CVE-2026-99242UNKNOWN

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix race between fallocate and mmap reads The fallocate implementation only takes invalidate_lock for punch hole, collapse range, and insert range operations. For standard allocation modes (mode == 0, FALLOC_FL_KEEP_SIZE), t

Related through CVE-LIST-V5 evidence

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix race between fallocate and mmap reads The fallocate implementation only takes invalidate_lock for punch hole, collapse range, and insert range operations. For standard allocation modes (mode == 0, FALLOC_FL_KEEP_SIZE), the lock is not held. During ntfs_attr_fallocate(), new clusters are mapped to the runlist via ntfs_attr_map_cluster() before being zeroed by ntfs_dio_zero_range(). This creates a window where concurrent mmap page faults can read uninitialized disk data. Since mmap uses filemap_fault() which takes invalidate_lock in shared mode, it can fault in pages during this window and expose old disk contents to userspace. This is an information leak and data integrity issue. Fix by taking invalidate_lock for all fallocate operations, not just for punch/collapse/insert modes. This prevents concurrent page faults from accessing unzeroed clusters during the allocation window.

CVE-2026-99241UNKNOWN

In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite() ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding mapping->invalidate_lock, so a concurrent truncate or fallocate can be in the middle of invalidating

Related through CVE-LIST-V5 evidence

In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite() ntfs_filemap_page_mkwrite() calls iomap_page_mkwrite() without holding mapping->invalidate_lock, so a concurrent truncate or fallocate can be in the middle of invalidating pagecache and rewriting the runlist while the write fault maps blocks and dirties the folio. This races with ntfs_attr_fallocate(), which merges clusters into the in-memory runlist, drops the runlist lock, and only afterwards zeroes the newly allocated clusters on disk; and with the punch-hole/insert/collapse paths that free clusters after truncating the cache. Per Documentation/filesystems/locking.rst, ->page_mkwrite() must ensure there are no truncate/invalidate races, "usually mapping->invalidate_lock is suitable for proper serialization". xfs takes its mmaplock (= the invalidate_lock rwsem) shared in exactly this path. Take invalidate_lock shared around iomap_page_mkwrite(). The read-only fault path is already covered because filemap_fault() itself grabs invalidate_lock shared on instantiation/read paths; only page_mkwrite was bypassing it in this driver.

CVE-2026-99240UNKNOWN

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: error damos_commit_quota_goal() for zero target_value Patch series "mm/damon: move zero damos quota target_value handling to the core layer". Having zero DAMOS quota target value can cause division by zero. DAMON

Related through CVE-LIST-V5 evidence

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: error damos_commit_quota_goal() for zero target_value Patch series "mm/damon: move zero damos quota target_value handling to the core layer". Having zero DAMOS quota target value can cause division by zero. DAMON API callers are checking the target value parameters to avoid that. It is easy to make mistakes in some of the multiple API callers. Move that to the core layer. Patch 1 adds the corner case handling into the core layer DAMON parameters validation logic. Patches 2 and 3 remove no more needed DAMON API callers side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER, respectively. This patch (of 3): If a DAMOS scheme has a damos_quota_goal of zero target_value, damos_quota_goal() could trigger division-by-zero error. Hence each DAMON API callers should do the zero target_value validation. It is easy to make mistakes. Actually such bugs in DAMON_LRU_SORT and DAMON_SAMPLE_MTIER were found and fixed [1]. It is better to handle the corner case only once in the core layer, instead of multiple places in all DAMON API callers. One straightforward option is using an alternative denominator for the corner case in the damos_quota_goal(). However, the zero target_value is meaningless. In this case, the quota goal is always evaluated as achieved or over-achieved. The quota will only keep being reduced. Simply avoid using zero target_value by adding a check in the core layer DAMOS quota goal parameters validation/commit path, damos_commit_quota_goal(). Update it to return an error in the case. Also update its caller to propagate the error.

CVE-2026-99234UNKNOWN

In the Linux kernel, the following vulnerability has been resolved: tracing: Unregister field variable histograms when the command fails An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide

Related through CVE-LIST-V5 evidence

In the Linux kernel, the following vulnerability has been resolved: tracing: Unregister field variable histograms when the command fails An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide it, and records it in target_hist_data->field_var_hists[]. If a later part of the same command fails, create_actions() returns an error and event_hist_trigger_parse() jumps to out_free. The write fails with -EINVAL and sched_switch gets no trigger, but: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \ events/sched/sched_waking/trigger # echo 'my_synth u64 lat; int a; int b' >> synthetic_events # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\ >> events/sched/sched_switch/trigger # cat events/sched/sched_waking/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] The second histogram is the one created for 'prio'. It is still active and still counting. out_free reaches destroy_field_var_hists(), which frees the field_var_hists[] entries, but never unregister_field_var_hists(), which is what removes the triggers and runs only from event_hist_trigger_free(). The entry is freed and the trigger is left with nothing tracking it. Unregister the field variable histograms in out_free as well, and record each one as soon as its trigger is registered rather than after the lookup that follows it, so no exit can leave a registered trigger untracked. The entry then belongs to field_var_hists[] and is released by destroy_field_var_hists(), so freeing it on that exit would be a double free.